LEGO® Set Review: 8280 Fire Engine
Technic / Tech Play
Fire Engine (us)
LEGO TECHNIC brandbil (da)
LEGO TECHNIC Flughafen Löschgigant (de)
51 page manual: 2 models, 25 steps / 25 steps.
Price Range: Purchased at TRU. US$49.99+tax = US$53.99
Special Features / Compatibility
- A few toggles
- 1 Black Technic Crank
- 2 Small Tires (used only in the alternate model)
Scale: Technic Figure scale
A decent set, but you can do better for the money.
The majority of the beams and plates in the set are red,
with a few grays and blacks thrown in. Some of the specialized mechanism
pieces are blue, and the bumper assemblies are white. Most pieces are
run-of-the-mill Technic fare, with a few special pieces here and there.
No tricky tasks in assembly. The big wheels are nice, and the set comes
with two Technic figures.
I like the set, but it's strictly straightforward stuff. It would be a
good one to pick up if you need a lot of longer red Technic beams, and
it's a nice-looking model, but there's nothing particularly innovative
about the set's construction. Finished model is sturdy.
One of my favorite things to do with Technic models like this is "Model
Team-ize" them, i.e. give them floorboards, enclosed cabins, and the like,
as well as upgrade the exterior lighting and general finish of the
exterior. This is going to be an excellent candidate for such
treatment--the basic lines of the model are attractive. Moreover, the
model is 12 studs wide, so a Model Team windshield should work
Nothing interesting about buying it--I paid full TRU retail and didn't
have to fight anybody for it. ;-)
Set Rating:Very-Good It was between this one, two smaller Technic sets, and the blue Model Team
hot rod last night at TRU. I wound up selecting the Flame Fighter largely
because it would give me a nice set of bigger wheels; I already had scads
of Model Team wheels from #5590. #8280 is a good-looking model, and the
action on the roof nozzle mechanism is smooth. The rear-mounted handheld
nozzle works well, but the action is slightly rougher than the
roof-mounted nozzle, as the familiar woven cord is involved on the rear
mechanism. Steering is via the standard roof-mounted method--the control
is a steering wheel. Nothing else particularly novel about the set; just
a good-looking truck. Not a bad set, but in hindsight I think I would
have been slightly happier buying two smaller Technic sets for the same
Model Rating:Good Not much in the way of surprises or design innovation. Assembly is easy
by full-line Lego standards, and very easy by Technic standards. It took
me about 2 hours from start to finish. I doubt I'll ever build the
alternate model--it just doesn't look very pretty at all in the pictures.
Playability Rating:Very-Good #8280 is a lot of fun to play with. The rear nozzle is sized to fit
perfectly in the Technic figures' hands. The figures fit well in the
cockpit, though except for the steering wheel they can't reach any of the
instruments without leaning waaaay up. The roof nozzle is fun, and
raises/lowers smoothly, with minimal "jerk." There are pegs for the
Technic firefighters' helmets on the outside of the truck, though they
don't stay on the pegs when you drive over rough terrain. Both nozzles
are controlled with side-mounted cranks, per standard Technic practices.
I think that children in the "intended" age bracket would have a good time
with this one.
Big, robust tires and wheels.
Two Technic figures included.
Smooth action on all moving parts.
Model proportioned well. It will be fun to give it the Model Team treatment.
Finished model is sturdy and stands up to mild-to-moderate collisions well.
Too many decals.
Alternate model is ugly.
The "arm" for the roof nozzle is raised and lowered with a side-mounted crank, but the nozzle itself must be moved by hand. A remote crank/lever control would have been much
There are a couple of simple gearbox assemblies
that I haven't seen before. Nothing innovative about the way they work;
they're just one-piece answers to questions that used to be solved with
multiple pieces. As such, I'm not especially fond of them. The 20x30
wheels and tires are nice to have, as are the Technic figures. These are
my first Technic figures, and I'm impressed with their range of movement.
The yellow flexible hoses are nifty, and I'm sure they'll be making an
appearance under the hood of a future automotive model of mine.
Simple Gearbox Assemblies
20x30 Wheels and Tires
Four Tires, String
Way too many decals (19!). There are five for the instrument panel, six
for lights (headlights, taillights), seven for general decor (unit number,
firefighter logos), and one to represent valves and gauges for the
rear-mounted hose. Fortunately, none cover more than one element. Most
look pretty good, but the ones for the lights are really chintzy. They'll
be the first things to go when I "Model Team-ize" this thing.
I'm sure it's cheaper to supply decals rather than pre-printed elements.
Personally, I'd pay a slightly higher price for my sets if it meant that
decals would go away forever.
Age (at review)
Favorite Product Lines/Themes
Technic & Model Team
I appreciate sets both for their own merit and for their playability with the rest of my collection. When I build an original model, I try to take
the best from the Technic and the Model Team worlds and combine them into
something that both looks and "acts" authentic.
I'm primarily interested
in wheeled vehicles, but I build a spacecraft or an aircraft every once in
a while. I post infrequently to rec.toys.lego, but I've enjoyed reading it for over a year now.
This is a fan created web site. LEGO® is a registered trademark of The LEGO Group, which does not sponsor, authorize or endorse this site.
All views expressed in the reviews on this site are those of the review author, and do not necessarily represent the views of Joshua Delahunty or the University of California.
Set names and photos are copyrighted materials owned by The LEGO Group, used according to its Fair-Use Policy. Set photo scans courtesy of Pause Magazine.
Background imagery supplied by and Copyright © Todd Lehman. Used with permission.
3-D Element bitmaps supplied by and Copyright © James Jessiman. Used with permission.
All product line and theme banner graphics hand-drawn (not scanned) and Copyright © 1996 Joshua Delahunty.
Send comments on these pages to the editor at firstname.lastname@example.org.